Xingtai Greatcity Commercial Co., Ltd.
Main products:Steamed Stuffed Bun Making Machine,Flour Mixing Machine,Wall Plastering Machine,Dumpling Making Machine,Dry Noodle Making Machine
Products
Contact Us
  • Contact Person : Ms. wang mary
  • Company Name : Xingtai Greatcity Commercial Co., Ltd.
  • Tel : 86-319-5236836
  • Fax : 86-319-2602121
  • Address : Hebei,xingtai,No.33 Miaowangzhuang Village Qiaoxi District Xingtai City
  • Country/Region : China
  • Zip : 054000

XJFQ-1000 rendering machine for wall

XJFQ-1000 rendering machine for wall
Product Detailed
XJFQ-1000 rendering machine for wall: 1.competitive price 2.Easy operation 3.Time and labor saving 4.Advanced

XJFQ-1000 rendering machine for wall:

XJFQ-1000 plastering machine was designed by doing many experiments. So once it appeared to the market, It winned a very good reputation and became the bestselling one.

Technical parameters:

Model

XJFQ-1000

Efficiency

450m²/8h

Voltage

380V

Total Power

2.2KW

Weight

240kg

Plastering Depth

2-25mm

Plastering Height

5m below

Size

1305*800*500(mm)

Detailed Information:

1.Plastering the roof completely(no leave 1mm), and you can stop it at any position to add ash, which avoid the problem of landing ash.

2.With its unique function of changing the plaster board, rising the large angle, declining and sharpening the small angle, which can guarantee the verticality of metope with zero erro.

3.Making use of hydraumatic telescopic stem, you can fasten the machine less than 10 seconds. That's the fastest and easiest way.

4.The width of the plaster board designed in the basis of the door. In and out the room freely.

5.There are two mininature vibrators behind the plaster board, so you needn't worry about the quality of plastering the wall.

6.Equipping with omni-directional wheel, you can move it anywhere you want.

7.Its ingenious design much better than manual work.

Safety Design:

1.Before changing the plastering angle, the switch refuse to startup, then avoid the damage of scraping board.

2.If the motor reverse, it will cut the power automatically to protect the wire from mass. Commutate the switch is OK.

3.If it got stuck when descending, the machine can cut the power automatically to avoid wire sling clipping.

4.Long time exposure outside, the wire will become rough, so if it brokes, the machine will get stuck for abnormal descending speed.

5.All the machine accessories are from the most popular companies in the world.We can guarantee it must be a high quality,hihg efficiency,and strong technical one.

6.Although hydraulic oil looses, it will not down back for its front heavy.

Working steps:

Spare parts:

XJFQ-1000 rendering machine for wall



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.